Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.13638692

- Product Categories
- Friendly Links
Information Name: | Pesticides dryer dryer _ _ provide professional advice |
Published: | 2015-03-04 |
Validity: | 0 |
Specifications: | Limited |
Quantity: | |
Price Description: | |
Detailed Product Description: | Spray Dryer higher steps / methods spray dryer prices, the composition of the complex, more difficult to use and maintain. Good fungicide spray dryer dryer operation, not only to ensure the normal PTC thermistor ceramic production, can also be appropriate to extend the spray granulation drying machine life, lower production costs boiling granulating dryer this, so spray made correct operation of grain dryer and strengthen the maintenance is necessary. Spray Dryer dehumidifier work boot switch is pressed, following the switch is closed, empty spray dryer, adjust the compressor outlet pressure of 0.25Mpa, clockwise rotation of the red emergency stop button, turn on the LCD interface, wait 15s included automatic operation interface, set the parameters, the set temperature of 180 degrees, the lower limit temperature is 180 degrees copper oxychloride dryer, the upper limit temperature 192 degrees, and the lower limit temperature is set between the heating opening time 10s, heating off time 3s, Zhen strike set vibration 2s, stop 2-10s, if the water content is low and other solid substances should set the temperature to be adjusted to 185-190 degrees, the lower limit to 185 degrees. Boot first open fan, dehumidifier, electric heating switch, the system is warming up, lights can always open, to be monitored inlet air temperature reaches the set temperature, the air temperature reaches between 80-90 degrees and the temperature is relatively stable Open the nebulizer 30s, and then open the interface in the peristaltic pump switch, adjust the speed to between 12-18, early peristaltic pump drive slowly, do not avoid feeding tube free air introducing air atomizer top arrow pointing to the right, Press Start on the atomizer key dryer, started to move on the material, the material to be sprayed into the atomizer start, open the tapper to observe the situation and atomization air temperature, if the air temperature is higher than 90 degrees, you can slowly adjust the peristaltic pump speed will continue to monitor the air temperature to see if stable calcium arsenate dryer, the air temperature dropped to 86-88 degrees stabilize both normal spray velocity, always observe the air temperature, adjust the best materials flow rate. Pesticides dryer dryer _ _ provide professional advice provided by Changzhou Drying Equipment Co., Kinder. Kinder Changzhou Drying Equipment Co. (www.jian-da.com) strong, credible, in Changzhou, Jiangsu drying equipment industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead Kinder dry and you hand into the brilliant, for a better future! |
Admin>>>
You are the 24969 visitor
Copyright © GuangDong ICP No. 10089450, Kinder Changzhou Drying Equipment Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 24969 visitor
Copyright © GuangDong ICP No. 10089450, Kinder Changzhou Drying Equipment Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility